Airbrush Manifold

● Possibility of connection  6 airbrush to  compressor

● Valve for each air exit

● Adjustable each air exit

● Fast connection

this connection with valve can connect 6 airbrush to one air source in same time ,easy to connect and  adjustable exit air because of valve on each exit . the air exit connection screw is 1/8 " and other side connector to compressor is 1/4" .

● For fix any airbrush valve 

This is a good tool for open and close the airbrush valve . in fact  all professional artist that do the job with airbrush ,

for repair , maintenance of valve or inside parts ,need this tool .

● For connect two 1/8" and 1/4" connection

With this connector , user could connect  1/8' and 1/4" female connection together . this is a brass made parts that plating 

with chrome ..

● For disposable air tank

This cap help painter to adjust the exit air when they are using disposable air tank.

● Include 1/8" quick release coupler 

● One side connection 1/8" , other side 1/4"

● Rubber hose with fabric cover

● High pressure residence (6 bar )

 whit this hose , most of airbrush connect to compressor  more easily , both side equipped to O ring washer. hose is flexible and light weight . the lactic pipe covered with textile and this armed pipe guaranty long life for hose . the length of this model is 1.8 m or 3 m , depend on your choice  .

Airbrush Manifold 3 Way with Valve 

● Possibility of 3 airbrush connection to same compressor

● Valve for each air exit

● Adjustable each air exit

● Fast connection

this connection with valve can connect 3 airbrush to one air source in same time ,easy to connect and  adjustable exit air because of valve on each exit . the air exit connection screw is 1/8 " and other side connector to compressor is 1/4" .

● For color charge 

This dropper help to put the color drop of color in airbrush tank.

● In 5 size

● Flexible 

● Match with Airbrush inside body

this brush can clean airbrush inside of body  , the set include  5 different size for different capacity .

all airbrush user need this set for best result of airbrush maintenance.

Airbrush Needle Guide Assembly Tool

● For fix any O ring and inside body parts

This is a tool for fix O ring and inside airbrush body parts  . in fact  all professional artist that do the job with airbrush ,

for repair , maintenance of  inside parts ,need this tool .

● For Painting Small Parts  

Normally the guys use the airbrush for painting very small parts and for keep parts for better result the holder is

auxiliary tool. it have several clips that take parts with minimum touch , it help painter spray the color with more 

attention . heavy metal basement , keep the holder more stable.holder have a cross arms and painter could change 

the clips position depend on his needs .

● both side connection 1/8"

● low price and simple

● Max pressure 4 bar

 Mostly this hose use by airbrush AB 138 and AB 115 . the hose is low price and simple , both side connection is 1/8" mm and equipped to O ring washer. hose is flexible and light weight . the hose made of flexible plastic pipe  . the length of this model is 1.5 m .

Airbrush Nozzle Spanner & Reamer

● For change broken nozzle 

This is a tool for changing damaged and broken nozzle , sometimes because of hit or falling airbrush , nozzle broken

and not possible open it with normal tool ,when user turn Spanner counter clockwise , it go deeper and same time

release broken nozzle   . in fact  all professional artist that do the job with airbrush ,

for repair , maintenance of  inside parts ,need this tool .

● Connection size one side 1/4" , other side 1/4" -40 (Special )

● Rubber hose with fabric cover

● High pressure residence (6 bar )

Whit this hose , most of airbrush connect to compressor  more easily , both side equipped to O ring washer . hose is flexible and light weight . the rubber hose  covered with fabric and this armed , guaranty long life for hose . the length of this model is 1.8 m or 3 m , depend on your choice   .

Airbrush Manifold 5 Way with Valve 

● Possibility of connection  5 airbrush to  compressor

● Valve for each air exit

● Adjustable each air exit

● Fast connection

this connection with valve can connect 5 airbrush to one air source in same time ,easy to connect and  adjustable exit air because of valve on each exit . the air exit connection screw is 1/8 " and other side connector to compressor is 1/4" .

● One side universal Badger adaptor , other side 1/8" 

● Low price and simple

● High pressure residence (6 bar )

This hose provide one side connection for universal Badger connection ,Spiral shape in open position is around 3 m and close position 0.3 m , this hose is economical and simple hose ,  whit this hose , most of airbrush connect to compressor  more easily , both side equipped to O ring washer. hose is flexible and light weight . 

● One side connection M5x0.5 mm, other side 1/8"

● low price and simple

● Max pressure 4 bar

 Mostly this hose use by airbrush AB 138 and AB 115 . the hose is low price and simple , one side connection is 1/8" and other side M5x0.5 mm , connection  equipped to O ring washer. hose is flexible and light weight . the hose made of flexible plastic pipe  . the length of this model is 1.5 m .